NON-GENUINE COX CLUTCH DRIVE CONE - LATE STYLE WITH THREE OUTER MOUNTING HOLES

Non-Genuine Cox Clutch Drive Cone - Late Style With Three Outer Mounting Holes

Cox CC2095NG, CC2095GNE, CC3095J, CC3095L,

1.18"

30 mm

3.74"

95 mm

1"

25.4 mm

Cox selected models including but not limited to New Generation, New ERA, C1332[13/32, 13-32](13 hp models 9505G and 9506C years 2005 to 2007) ride-on lawn mowermodels.

Later style with 3 outer holes for locating screws.

1

For early type clutch cone options, with one pin hole (note: not suited to themodels listed above), use our part numbers CHD5335 (non-genuine) or CHD6954(genuine).

When installing a new Cox drive cone please insure the drive plate surfaces are ingood condition with no grooves. It is necessary to deglaze the drive plate surfaceso the new cone will not slip generating excessive heat & damaging the drive cone.As the new cones can no longer contain asbestos over heating will cause prematurefailure. A quick way to deglaze the drive plates is to use a 4" disc sander withmedium grit paper. This can also be done quickly at each service to reduce drivefailure. It is only necessary to take the shine off the surface to give the cone asurface to grip to. Any grooves will need to be machined in a lathe.

Cox Non-Genuine,

Clutch cone, cone - clutch, drive cone - clutch,